Danville's Building Department names new patios on its permit list, and the ground around town is the textbook example of central-Indiana soil. Here's what both mean for your project.
Danville's permit rules for patios
The Town of Danville's Building Department lists new patio or deck construction among projects that typically require a permit.
Read moreShow less: Danville's permit rules for patios
Its guidance also says2:
- Accessory structures, pools and fences cannot be placed in an easement.
- Covered or attached decks are treated as additions.
- Applications go through the Town's iWorQ portal, and processing can take up to 10 business days.
That 10-day window is worth building into your schedule, especially if you're aiming for a spring start. Your contractor should apply as soon as the design and site plan are final.
Danville's ground: the original "Miami" soil
Every USDA soil series has a "type location," the spot where it was formally described.
Read moreShow less: Danville's ground: the original "Miami" soil
For the Miami series, one of the most common soils in central Indiana, that spot is in Hendricks County, about 3 miles east of Danville3. The USDA describes Miami as moderately well drained, with up to about 18 inches of loess over dense loamy glacial till.
Miami usually sits on the higher, better-drained parts of the landscape, with wetter Crosby and Brookston soils on swells and in low spots4. Countywide, the USDA survey shows Crosby (about 32%), Treaty (about 14%) and Miami (about 14%) as the leading series5. Two lots on the same street can drain very differently, so a good contractor looks at your actual yard before specifying the base. Footings for any structure need to meet the 30-inch frost depth listed for Hendricks County6.
What patios cost around Danville
A 2026 Hendricks County contractor guide puts paver patios at $15–$35 per sq ft installed, with most Avon-area work around $20–$22 per sq ft1.
Read moreShow less: What patios cost around Danville
The metro-wide Angi average is $3,637, with most homeowners paying $2,297–$6,6997. Rural lots with long access or extra grading can run higher.
Permits
Permit rules in Danville are set by the Town of Danville, not by Indianapolis, and they can change. The contractor you hire should confirm whether your specific project needs a permit and pull it if so. If you want to double-check, call the Town of Danville building or planning department before work starts.
Questions to ask Danville contractors before you sign
A short checklist for comparing contractors before you sign.
Read moreShow less: Questions to ask Danville contractors before you sign
- Have you allowed for Danville's permit review, which can take up to 10 business days?
- Does the layout keep the patio and any structures out of easements?
- Is the patio area on well-drained ground or a wetter low spot, and how does that change the base?
- Who applies for any permit or zoning approval, and is that time in the schedule?
- Is the workmanship warranty in writing, and can you show proof of insurance?
Indiana requires a written contract for home improvement work over $1508. Make sure yours lists scope, materials, price and timeline.
